Audio Preset Memory; Audio Preset Recall - Kenwood KDC-MP445U Instruction Manual

Audio Adjustments

Audio Preset Memory

Registering the value setup by Audio Control.
1
Setup Audio Control
Setup the <Audio Control> (page
2
Enter Audio Control mode
Press the [AUDIO] button.
3
Select Audio preset memory mode
The item can be selected and determined as
follows.
"Detailed Settings" ➜ "Audio Preset"
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4
Select the Audio Preset Memory
Turn the Control knob to select "Memory", and
then press the [ENTER] button.
5
Turn the Control knob to select "YES", and then
press the [ENTER] button.
"Memory Completed" is displayed.
6
Exit Audio Control mode
Press the [ ] button for at least 1 second.
⁄
• To use this function, this unit must be powered for more
than one hour.
• Register 1 pair of Audio Preset Memory. You cannot register
by the source.
• When you press the Reset, all the sources will be the setting
value which is registered.
• The following items can be registered.
"Bass Center FRQ", "Bass Level", "Bass Q Factor", "Bass EXT",
"Middle Center FRQ", "Middle Level", "Middle Q Factor",
"Treble Center FRQ", "Treble Level", "SubWoofer Level", "HPF
Front", "HPF Rear", "LPF SubWoofer", "Subwoofer Phase"
8
|
KDC-X494/ KDC-MP445U/ KMR-440U

Audio Preset Recall

Recalling the sound setup registered by
Preset Memory> (page
1
7). Select the source
Press the [SRC] button.
For how to select source item, refer to
source selection> (page
2
Enter Audio Control mode
Press the [AUDIO] button.
3
Select Audio preset memory mode
The item can be selected and determined as
follows.
"Detailed Settings" ➜ "Audio Preset"
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4
Select the Audio Preset Recall
Turn the Control knob to select "Recall", and
then press the [ENTER] button.
5
Turn the Control knob to select "YES", and then
press the [ENTER] button.
"Recall Completed" is displayed.
6
Exit Audio Control mode
Press the [
<Audio
8).
<Power and
4).
] button for at least 1 second.