Advertisement
1. Product Overview
The Nokia Optical Network Terminal (ONT) XS-010X-Q that has one
1/10 Gigabit Ethernet (GigE) is part of the industry-leading Nokia
ONT product family. It is designed to deliver triple play services in a
fiber to the home (FTTH) environment to single family units (SFUs)
where an Ethernet port
is required. The Nokia
ONT terminates the 10
G symmetrical Passive
Optical Network (XGS-
PON) fiber interface
that is compliant with a
Full Service Access
Network (FSAN).
The Nokia ONT XS-010X-Q is designed for residential customer
requirements and offers data services to the subscriber through
FTTH or fiber to the premises (FTTP) applications. The Nokia ONT XS-
010X-Q is an ONT suitable for indoor deployments and is compliant
with ITU-T G.9807.1 supporting a line rate of 10 Gb/s upstream and
10 Gb/s downstream. With XGS-PON as the uplink interface, the XS-
010X-Q is also compliant with the standard optical network unit
(ONU) management and control interface (OMCI) definition. The XS-
010X-Q can be managed from a remote site using application
management services (AMS) and supports the full range of fault,
configuration, accounting, performance, and security (FCAPS)
functions.
A. Technical Specifications
Height: 3.0 cm (1.18 in)
Width: 13.5 cm (5.31 in)
Length: 13.5 cm (5.31 in)
Weight: 0.366kg (0.81 lb)
Desktop or wall mount
Power consumption:
Standby mode: 4.11 W
•
Typical mode: 7.84 W
•
B. Manufacturer Information
For Products Purchased in EU/EAA Countries
The products are manufactured and imported by Nokia Solutions and
Networks Oy.
Karakaari 7, 02160 Espoo, Finland.
Nokia is a registered trademark of Nokia Corporation.
For Products Purchased in the United States
The products are imported by Nokia of America Corporation.
Offices:
https://www.nokia.com/contact-us/offices/#north-
•
america
Nokia ONT XS-010X-Q Quick Reference Guide
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
Support:
https://www.nokia.com/networks/business-support/
•
Other contacts:
https://www.nokia.com/contact-us/
•
Please contact your Internet Services Provider in case of questions
on the product.
2. Safety Guidelines
ALWAYS READ THE PRODUCT GUIDE BEFORE SET UP OR USE OF THE
PRODUCT. IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF
WITH THE PRODUCT GUIDE AND WARNINGS, AND TO USE A PRODUCT
PROPERLY. CONTACT YOUR INTERNET SERVICES PROVIDER FOR
FURTHER QUESTIONS.
Warning - Risk of electric shock or fire
Connect the Product power adaptor or cord to the right supply
voltage (for example, 230V in Europe, Turkey, Ukraine, 120V AC
in US, 230V in Australia and New Zealand, 230V in South Africa, 220V
in Russia, Morocco).
The socket-outlet shall be easily accessible.
Pay attention to the power load of the electrical outlet and possible
extension cord. An overburdened power outlet or damaged cords
and plugs may cause electric shock or fire. Check the power cords
regularly. If you find any damage, replace the cord immediately.
Do not connect the plug into an extension cord, receptacle, or other
outlet unless the plug can be fully inserted with no part of the blades
exposed.
Leave adequate space for heat dissipation to avoid any damage
caused by overheating the Product. Do not cover the Product or its
ventilation holes. Blocking the ventilation holes may cause fire.
Use the power adapter provided with your Product and do not fasten
the power cable to building surfaces. Ensure the cable can move
freely. Do not place heavy objects on the cable.
Do not use the Product outside, and make sure all the connections
are indoors.
Do not install, use, or service this Product during a thunderstorm.
There is a remote risk of electric shock from lightning.
Caution - Potential equipment damage
Follow these recommendations to protect yourself and the Product
from harm:
Do not look directly at the optical port without protection.
•
Do not insert any sharp object into the openings of a Product.
•
Do not put the Product near a heat source. Avoid placing the
•
Product in direct sunlight.
Do not put the Product in damp or wet locations; for example,
•
near a bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool. Do not spill any liquid on
the Product.
Do not touch the Product or its power adapter or cord with wet
•
hands.
Do not place the Product on an unstable surface or support.
•
CID210704
3FE-49331-AAAA-TCZZB
Issue 1, July 2021
Advertisement
Table of Contents
Related Manuals for Nokia XS-010X-Q
Summary of Contents for Nokia XS-010X-Q
- Page 1 Russia, Morocco). FTTH or fiber to the premises (FTTP) applications. The Nokia ONT XS- 010X-Q is an ONT suitable for indoor deployments and is compliant The socket-outlet shall be easily accessible.
- Page 2 Electronic Equipment (2011/65/EU). It is recommended that users and other individuals maintain a Nokia Solutions and Networks Oy declares that the Product is in distance of at least 10 cm between themselves and the Product to compliance with Radio Equipment Directive 2014/53/EU; Low avoid exposure.
- Page 3 No Unauthorized Modifications: Do not make any changes or modifications to the Product without the prior express written approval of Nokia. Any changes or modifications made without express written approval could void the user’s authority to operate the device.
Need help?
Do you have a question about the XS-010X-Q and is the answer not in the manual?
Questions and answers
I have a new installation (2 weeks) and my ONT has stopped passing the signal. It was a bit slow so I did a restart and it ended with a constant red Alarm light. It was new out of the box when the ISP tech installed it. I'm contemplating moving back to my Coax because I can't have unreliable internet. Any thoughts on trouble shooting?
If a Nokia XS-010X-Q ONT has a constant red Alarm light and is not passing a signal, follow these troubleshooting steps:
1. Power Cycle the ONT – Turn off the ONT, unplug it, wait for about 30 seconds, then plug it back in and turn it on.
2. Check for Service Outages – Contact your internet service provider (ISP) to confirm if there is an outage in your area, as this could be the cause.
3. Inspect Cables and Connections – Ensure all fiber and power cables are securely connected and not damaged.
4. Avoid Resetting the ONT – Some ISPs warn against resetting the ONT, as it may require a technician visit to restore service.
5. Check Ventilation and Overheating – Ensure the ONT is in a well-ventilated area and not overheating.
6. Contact Your ISP for Support – If the issue persists, inform your provider, especially if you have already reset the device, as they may need to reconfigure it or send a technician.
Following these steps can help diagnose and resolve the problem.
This answer is automatically generated
Gerät pfeift im Dauerton
The Nokia XS-010X-Q device is likely making a continuous beeping sound due to a solid red alarm, which indicates a fault condition. This can happen during an internet outage or if the device detects a serious issue, such as loss of signal or hardware failure.
This answer is automatically generated
Can a wifi Extende.net port be add to this device? what extende is conparable to this device and service?
The Nokia XS-010X-Q is an Optical Network Terminal (ONT) that connects to a router for internet access. A Wi-Fi extender can be added to improve wireless coverage, but it must be connected to the router, not directly to the ONT.
Compatible Wi-Fi extenders should support the same Wi-Fi standards as the router used with the XS-010X-Q. Common options include TP-Link RE series, Netgear EX series, or any extender that matches the router’s specifications.
This answer is automatically generated
I'm a new fiber customer through Ezee Fiber in Sugar Land Texas. The installation consists of your XS-010X-Q ont connected to an eero 7 router. In my available network list, I'm seeing two networks with my SSID (which is "planned"): one says "planned connected via eero"; the other simply says "planned". I called eero tech support about this, and they determined that your Nokia ont also functioned as a WAP, and that's where the "planned" SSID was being generated. They told me that it was advisable to put the SX-010S-Q into bridge mode to prevent this, as it could interfere with the operation of the eero router. Please tell me how I would go about doing this, as I cannot find any usable instructions online.