Advertisement
Quick Links
Advertisement
Related Manuals for HOMCOM 820-195V70
Summary of Contents for HOMCOM 820-195V70
-
Page 2: Important Safety Instructions
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Important Safety Instructions When using this electrical appliance, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to person, including the following: ·... - Page 3 the cord or any part of the appliance shows signs of damage. · If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. · Do not operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
- Page 4 · Before cleaning the appliance, ensure it is unplugged from the power and that it is completely cooled. · Do not clean the appliance with abrasive chemicals. · Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance.
- Page 5 · Children of less than 3 years should be kept away unless continuously supervised. · Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Page 6 Cursor Day time Timer Standby Temperature/serial number display Timer off Timer on Time/Temperature display Automatic control of heating 10 Heating position 11 Flame brightness Temperature and serial number display: Normally it displays the room temperature; while setting the temperature, the setting temperature is displayed; When setting the timer, serial number is displayed.
-
Page 7: Automatic Heating
1) Connect the power 2) Turn on the power switch 3) Press the control switch or "ON/OFF" key of the remote controller to start up 4) Press the 1000W/2000W button once for the low heat setting 1000W; press twice for the high heat setting 2000W;... -
Page 8: Timer Switch
For deleting the current item of setting, press "C" to delete 3) Steps for timer setting (I) Select the settings of the serial number Press the "TIMER SET" button, and the serial number starts blinking Press the "+" or "-" to change the serial number until you get the serial number that you need to set or modify. (II) Select date Press "... - Page 9 electrician Cleaning and Maintenance Warning- Always disconnect from the mains supply before cleaning heater. For general cleaning use a soft clean duster - never use harsh abrasive or cleaners. The glass viewing screen should be cleaned carefully with a soft cloth. DO NOT use proprietary glass cleaners.
- Page 10 (indicative) outdoor temperature feedback applicable Maximum continuous electronic heat charge control with room and/or max,c heat output outdoor temperature feedback applicable Auxiliary electricity fan assisted heat output consumption applicable At nominal heat output 0.014(fan Type of heat output/room temperature control (select one) motor) At minimum heat output el...
Need help?
Do you have a question about the 820-195V70 and is the answer not in the manual?
Questions and answers