Axis P3265-V User Manual page 22

AXIS P3265-V Dome Camera
The device interface
Focal length
of view, while a lower value leads to a lower magnification and a wider angle of view.
Stabilizer margin
stabilize. If the product is mounted in an environment with a lot of vibration, move the slider towards Max. As a result, a smaller
scene is captured. If the environment has less vibration, move the slider towards Min.
Straighten image
functionality is useful when it's not possible to mount the camera exactly level. Ideally, straighten the image during installation.
: Click to show a supporting grid in the image.
: Click to hide the grid.
Stream
General
Resolution: Select the image resolution suitable for the surveillance scene. A higher resolution increases bandwidth and storage.
Frame rate: To avoid bandwidth problems on the network or reduce storage size, you can limit the frame rate to a fixed amount.
If you leave the frame rate at zero, the frame rate is kept at the highest possible rate under the current conditions. A higher
frame rate requires more bandwidth and storage capacity.
Compression: Use the slider to adjust the image compression. High compression results in a lower bitrate and lower image quality.
Low compression improves the image quality, but uses more bandwidth and storage when you record.
H.26x encoding
: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle
: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to
: Turn on and use the slider to straighten the image horizontally by rotating and cropping it digitally. The
The image before and after it has been straightened.
22