Axis P3265-V User Manual page 19

AXIS P3265-V Dome Camera
The device interface
• Street light – mercury
in street lighting.
• Street light – sodium
lights common in street lighting.
• Hold current: Keep the current settings and do not compensate for light changes.
• Manual: Fix the white balance with the help of a white object. Drag the circle to an object that you want the
camera to interpret as white in the live view image. Use the Red balance and Blue balance sliders to adjust the
white balance manually.
Day-night mode
IR-cut filter:
• Auto: Select to automatically turn on and off the IR-cut filter. When the camera is in day mode, the IR-cut filter
is turned on and blocks incoming infrared light, and when in night mode, the IR-cut filter is turned off and the
camera's light sensitivity increases.
• On: Select to turn on the IR-cut filter. The image is in color, but with reduced light sensitivity.
• Off: Select to turn off the IR-cut filter. The image is in black and white for increased light sensitivity.
Threshold: Use the slider to adjust the light threshold where the camera changes from day mode to night mode.
• Move the slider towards Bright to decrease the threshold for the IR-cut filter. The camera changes to night mode
earlier.
• Move the slider towards Dark to increase the threshold for the IR-cut filter. The camera changes to night mode later.
IR light
If your device doesn't have built-in illumination, these controls are only available when you have connected a supporting Axis
accessory.
Allow illumination: Turn on to let the camera use the built-in light in night mode.
Synchronize illumination: Turn on to automatically synchronize the illumination with the surrounding light. The synchronization
between day and night only works if the IR-cut filter is set to Auto or Off.
Automatic illumination angle
Illumination angle
from the camera's angle of view. If the camera has a wide angle of view, you can set the illumination angle to a narrower angle,
which equals a greater tele position. This will result in dark corners in the image.
IR wavelength
White light
Allow illumination
Synchronize illumination
Exposure
: Fixed color adjustment for ultraviolet emission in mercury vapor lights common
: Fixed color adjustment that compensates for the yellow orange color of sodium vapor
: Turn on to use the automatic illumination angle.
: Use the slider to manually set the illumination angle, for example if the angle needs to be different
: Select the desired wavelength for the IR light.
: Turn on to let the camera use white light in night mode.
: Turn on to automatically synchronize the white light with the surrounding light.
19