Axis P3265-V User Manual page 12

AXIS P3265-V Dome Camera
Configure your device
5. To position the text overlay, click
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select Object Analytics.
4. In the list of actions, under Overlay text, select Use overlay text.
5. Select a video channel.
6. In Text, type "Motion detected".
7. Set the duration.
8. Click Save.
Note
If you update the overlay text it will be automatically updated on all video streams dynamically.
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and
to stop two minutes after.
Turn on audio:
1. Set up the stream profile to include audio, see Add audio to your recording on page 14.
Turn on audio detection:
1. Go to System > Detectors > Audio detection.
2. Adjust the sound level according to your needs.
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Audio, select Audio Detection.
4. In the list of actions, under Recordings, select Record video.
5. In the list of storage options, select SD_DISK.
6. Select the stream profile where audio has been turned on.
7. Set the prebuffer time to 5 seconds.
8. Set the postbuffer time to 2 minutes.
9. Click Save.
Detect tampering with input signal
This example explains how to send an email when the input signal is cut or short-circuited. For more information about the
I/O connector, see page 50.
1. Go to System > Accessories and turn on Supervised.
and select an option.
12