Hotpoint Ariston SI E40 BA1 Operating Instructions Manual page 25

Selecting the temperature
and adjusting the steam (B
1. Connect the plug of the appliance into a
2.
desired temperature. If you go from a lower
temperature to a higher temperature, the
selected temperature is reached.
3. When the iron reaches the set temperature, an
acoustic signal is emitted and the temperature
indicator light goes off.
4. We recommend to check the garment label
in order to identify the fabric type. In case of
doubts, it is recommended not to use the spray
function and iron a hidden corner in order to
determine the most appropriate temperature
and avoid damaging the fabric. In case of very
delicate fabrics, such as silk, wool, and synthetic
materials, iron the garment inside out to prevent
shiny marks. Start ironing the garments that
require a lower temperature, such as synthetic
fabrics.
Fabrics with this symbol on the label
must not be ironed.
GARMENT
FABRIC TYPE
LABEL
synthetic
silk
mixed cotton
wool
mixed wool
cotton
linen
jeans
5. Select the steam level with the steam regulator
steam ironing, make sure that the water level in
the reservoir is at least ¼.
USE
The iron starts producing steam as soon as
it reaches the set temperature.
may be necessary to press the shot of
)
2
TEMPERATURE STEAM
INDICATION INDICATION
MIN
LINEN
LCD
steam button several times to (re)activate the
Ironing without steam (C
1.
2. Select the recommended ironing temperature
Steam ironing (D
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the appropriate steam with the steam
temperature with the temperature buttons +/-
1
Ironing with shot of steam (E
The shot of steam function allows you to eliminate
persistent wrinkles. You can use this function both in
no-steam and steam ironing mode.
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the recommended ironing temperature
3.
of steam function has not been used for some
time, it may be necessary to press the button
repeatedly to activate the pump.
USE
Ironing without steam (C
1.
2. Select the recommended ironing temperature
Steam ironing (D
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the appropriate steam with the steam
temperature with the temperature selector
2
)
1
)
1
)
1
)
2
)
2
it en
1
1
2
25