Stihl TSA 230 Instruction Manual page 49

9 Mounting an Abrasive Wheel
9.1 Removing an abrasive wheel
1
► Press and hold the spindle locking mecha‐
nism (1)
► Turn the shaft with the combination wrench
until the shaft is blocked
► Use the combination wrench to loosen the
hexagon head screw (2)
0458-707-9621-B
4
3
► Release the spindle locking mechanism and
unscrew the hexagon head screw (2)
► Remove the front thrust washer (3) from the
shaft together with the abrasive wheel (4)
9.2 Fitting an abrasive wheel
► Fit the new abrasive wheel (4)
WARNING
Note the arrows indicating the direction of rota‐
tion on diamond abrasive wheels.
► Position the front thrust washer (3) so that the
words "TOP SIDE" are visible
► Screw in the hexagon head screw (2)
2
English
4
3
2
49