Stihl TSA 230 Instruction Manual page 45

5 Sample Applications
► Always start at the bottom, using the upper
quarter of the abrasive cutting wheel for cut‐
ting
► Use the upper quarter of the abrasive cutting
wheel for cutting the opposite lower side.
► First lateral cut on the top half of the pipe
► Second lateral cut in the marked area – never
cut into the area of the last cut, to ensure a
firm hold on the part of pipe to be cut
0458-707-9621-B
Only make the last top cut once all bottom and
lateral cuts have been made.
► Last cut always from the top (approx. 15 % of
the pipe circumference)
5.9 Concrete pipe – cut recess
Sequence of cuts (1 to 4) is important:
► First, cut hard-to-reach areas
1
► Always make severing cuts so that the abra‐
sive cutting wheel is not pinched
► Use wedges and/or leave ridges that are bro‐
ken after cutting
English
2
45