Operating The Main Menu (Basic Operation Of The Main Menu) - JVC G1000S Instructions Manual

Operating the Main Menu (Cont.)

Operating the Main Menu (Basic Operation of the Main Menu)

Remote control unit
OPERATE
VOL.
PAGE
BACK
PRESET
QUICK
ALIGN.
PAGE BACK button
Main menu
(Example: During video signal input)
Input line
V I D E O
P I X E L C L O C K
P O S I T I O N
P I C T U R E
S O U N D
O P T I O N S
S O U R C E
D E C O D E R
L A N G U A G E
Decoder (color system)
34
G1000S 34-45.EN
MENU/ENTER
button
COMPUTER VIDEO
FOCUS
MENU/ENTER
Cursor buttons
AV
MUTING
Submenu items
Source
A U T O ( N T S C )
N T S C
E N G L I S H
Language
34
For projector's menus, the setting menu and the main menu are
available.
Here, we explain about the operation of the main menu. (see pages
34 to 47)
For the setting menu, refer to "Making Basic Settings" on page 31.
1 Press the MENU/ENTER button.
• The main menu is displayed on the screen.
2 Select an item with the cursor button
5 or ∞.
• The selected item is shown in magenta color on the screen.
3 Set (adjust) the item.
To select DECODER or LANGUAGE,
• Set it with the cursor button 2 or 3.
* To finish the main menu, press the PAGE BACK button.
To select an item on the submenu,
• Press the MENU/ENTER button to display the submenu, then
set (adjust) the item with the cursor buttons 2 / 3 or 5 / ∞.
* To return to the main menu, press PAGE BACK again. (To
finish the main menu from the submenu, press PAGE BACK
twice.)
About main menu display:
Input line display: The selected input-mode designation is
displayed. For input-mode designation,
"Y/C", "VIDEO", "Y, P
"COMPUTER1" and "COMPUTER2" are
available.
Source display: The type of signal being input is
displayed. With this projector, unique
designations are previously given to
specific
frequencies. This allows the source
selected under SOURCE (submenu item)
to be indicated. The source setting can
be selected from AUTO mode and
dedicated (forced) modes. When AUTO
is selected, the horizontal and vertical
frequencies of a signal being input are
detected and the matched designation is
displayed in ( ).
Display example: "AUTO (NTSC)"
Therefore, be careful as the source
display does not always correspond to
the indication or type of the input signal.
For the unique designations for the
specific
frequencies, see pages 19 and 46.
Submenu item display:
PIXEL CLOCK : See page 37.
POSITION : See page 38.
PICTURE : See pages 39 – 41.
SOUND : See page 42.
OPTIONS : See pages 43 – 45.
SOURCE : See pages 46 and 47.
Decoder (Color system) display : See page 35.
Language display
98.9.21, 9:56 AM
/B-Y, P /R-Y",
B R
horizontal and vertical
horizontal and vertical
: See page 36.