Assembly; Adjustable Height - Hiboy T1 User Manual

Kick scooter

4. Assembly

To open, pull the folding machine while holding the handlebar, and push the stem until you hear a CLEAR click. Please

make sure that you hear a click, otherwise, the folding machine will not lock into place. Then unfold the kickstand to

support the scooter. ( Visual instruction 1,2)

1.Open the cover, and take out two handles off the carrier and slide them onto the T-piece. Please make sure the handles

must snap into the fixed holes. And then, turn off the cover. (Visual instruction 3)

Open the quick-release lock and pull out the handlebar stem until it clicks and suits the height of the rider, then close the

quick-release lock again. The clamp tension of the quick-release lock can also be adjusted by tightening or loosening the

securing nut(Visual instruction 4,5)

Table of Contents