Table of Contents
Advertisement
Load Optimized Defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
Boot Override
HDD/FDD/USB
If your system becomes unstable and you have loaded the BIOS default settings, you can use this function
File in HDD/FDD/USB
automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked
properly (last known good record).
Chapter 3
Appendix
RAID Levels
RAID 0
Minimum
Number of Hard
Array Capacity
Number of hard
drives * Size of the
smallest drive
Fault Tolerance
No
Before you begin, please prepare the following items:
use two hard drives with identical model and capacity).
Windows setup disk.
Motherboard driver disk.
A USB thumb drive.
A. Installing SATA hard drive(s) in your computer
Connect the SATA signal cables to SATA hard drives and the SATA ports on the motherboard. Then connect
on the motherboard.
Yes to load the optimal BIOS default settings. The BIOS defaults
RAID 1
RAID 5
2
Size of the smallest
(Number of hard
drive
drives -1) * Size of
the smallest drive
Yes
(Note 1)
(To ensure optimal performance, it is recommended that you
(Note 2)
- 32 -
Select File in
Select
RAID 10
(Number of hard
drives/2) * Size of the
smallest drive
Yes
Yes
Yes
Advertisement
Table of Contents
