Table of Contents
Advertisement
Serial Port A
2-6
Power Management
Resume by Alarm
If enabled, set the date and time as following:
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
HPET Support
Enabled)
Soft-Off by PWR-BTTN
button is pressed for less than 4 seconds, the system will enter suspend mode.
AC BACK
Memory
The system returns to its last known awake state upon the return of the AC power.
Always On
The system is turned on upon the return of the AC power.
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
- 30 -
Advertisement
Table of Contents
