Gigabyte GA-990FX-Gaming User Manual page 23

Core C6 State (Note 1)
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
HPC Mode (Note 1)
Allows you to determine whether to enable High Performance Computing (HPC) mode for the CPU. Enabled
APM (AMD Application Power Management)
enabled.
(Note 2)
System Memory Multiplier
Allows you to set the system memory multiplier. Auto
Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK Clock Control and System Memory Multiplier
settings.
Advanced Memory Settings
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
DRAM Timing Selectable
Quick and Expert
Quick, Expert.
When using a non-XMP memory module or
or
The value displayed here is dependent on the CPU being used.
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a memory module that supports this feature.
(Note 1)
(Note 2)
(Note 2) , System Memory Multiplier, Memory Frequency(MHz)
- 23 -
is set to Disabled, the value
is set to