Before First Use; Daily Use - Washing Only - Electrolux EW2W3068E3 User Manual

Hide thumbs Also See for EW2W3068E3:
Table of Contents

Advertisement

11. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Connect the mains plug to the mains
socket.

12. DAILY USE - WASHING ONLY

WARNING!
Refer to Safety chapters.
12.1 Loading the laundry
1. Open the appliance door
2. Empty the pockets and unfold the
items before you put them in the
appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
2. Open the water tap.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in
the compartment for washing phase.
5. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
12.2 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Put the detergent and the fabric
conditioner into the compartments.
3. Carefully close the detergent drawer
ENGLISH
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents