Husqvarna AUTOMOWER 405X Operator's Manual page 38

Message Cause
Battery problem
Temporary battery or firmware related issue
in the product.
Incorrect type of battery.
Battery temperature
The temperature in the battery is too high or
outside limits too low to start operation.
Wrong PIN code Wrong PIN code has been entered. Five at-
tempts are permitted, and the keypad is then
blocked for a period of time.
No drive The product has got caught in something and
has been slipping.
Slipped
The work area includes a steep slope.
The guide wire is not laid diagonally in the
slope.
Collision sensor
The drive wheels on the product are blocked. Free the product and correct the cause of
problem, front/rear
Collision
Alarm! Mower switch-
The alarm is activated because the product
ed off
had been switched off.
Alarm! Mower stop-
The alarm is activated because the product
ped
has been stopped.
Alarm! Mower lifted
The alarm is activated because the product
has been lifted.
Alarm! Mower tilted
The alarm is activated because the product
has been tilted.
Alarm! Mower was The alarm is activated because the product
moved
has been lifted.
Alarm! Outside geo-
The alarm was activated because the prod-
fence
uct was outside its
38 - Troubleshooting
Action
Restart the product. If the problem stays
speak to your authorized service technician.
Use original batteries recommended by the
manufacturer.
No action. The product will start to operate
when the temperature is in limits.
Enter the correct PIN code. If the PIN code is
incorrect, use the link in the app to send the
PIN code to your registered e-mail address.
If you have not registered the e-mail adress,
contact your local Husqvarna representative.
Free the product and rectify the reason for
the lack of drive. If it is due to wet grass,
wait until the lawn has dried before using the
product.
Steep slopes should be isolated. Refer to
put the boundary wire in a slope on page 15 .
Make sure that the guide wire is installed di-
agonally across the slope. Refer to
a secondary area on page 16 .
problem. If the problem stays, speak to your
authorized service technichian
Adjust the security level in the
menu. Refer to
GeoFence .
To
To make
Security
Security level on page 23 .
1650 - 005 - 17.03.2022