JVC VN-V25U VN-V26U Instructions Manual page 83

A
DisplaySize
B
Capture
C
Pause
D
Setup
E
Speech
(VN-V26U only)
F
Audio Setup
(VN-V26U only)
Switches the display size. (VGA or QVGA)
Captures the currently displayed image on the computer.
Images captured will be stored as a JPEG file in the folder created under
[My Document] of the computer. The default folder names for VN-V25U
and VN-V26U are AVN-V25UB and AVN-V26UB respectively. The file
name is made up of the year, month, day, hour, minute, second, and
millisecond.
The time denoted by the file name is based on the time at the computer
and not the internal clock of VN-V25U/26U.
Motion images cannot be captured.
Pauses/Resumes playback of images.
Displays the built-in viewer settings window. (A Page 84)
This setting screen is used to set the built-in viewer as a software on the
computer.
Caution:
● Settings on this setting screen do not affect settings of the VN-V25U/
26U unit.
Starts sending audio to VN-V26U from the client PC. Only one stream of
audio can be sent for one unit of VN-V26U. You cannot send audio from
another client PC when transmission of audio from a client PC is in
progress.
● The [Speech] button lights up in red during audio transmission.
● [Speech] button will not blink in red when audio cannot be sent.
Note:
● The JPEG and MPEG4 viewers cannot send audio at the same time.
The audio setting screen appears. (A Page 94)
Caution:
● Settings on this setting screen do not affect settings of the VN-V26U
unit.
83