JVC VN-V25U VN-V26U Instructions Manual page 89

A
DisplaySize
B
Pause
C
Setup
D
Speech
(VN-V26U only)
E
Audio Setup
(VN-V26U only)
Note:
● To use the built-in MPEG4 Viewer of VN-V25U/26U, install "ffdshow" that is open source codec. You
can download "ffdshow" from the Internet.
Switches the display size. (VGA or QVGA)
Pauses/Resumes playback of motion images.
Displays the built-in viewer settings window. (A Page 90)
This setting screen is used to set the built-in viewer as a software on the
computer.
Caution:
● Settings on this setting screen do not affect settings of the VN-V25U/
26U unit.
Starts sending audio to VN-V26U from the client PC. Only one stream of
audio can be sent for one unit of VN-V26U. You cannot send audio from
a different client PC when transmission of audio from a client PC is in
progress.
● The [Speech] button lights up in red during audio transmission.
● [Speech] button will not blink in red when audio cannot be sent.
Note:
● The JPEG and MPEG4 viewers cannot send audio at the same time.
The audio setting screen appears. (A Page 94)
Caution:
● Settings on this setting screen do not affect settings of the VN-V26U
unit.
89