JVC VN-V25U VN-V26U Instructions Manual page 14

Getting Started
Sending audio to the network (VN-V26U
only)
Sends out audio picked up using the built-in
microphone of VN-V26U to computers.
VN-V26U
MAC address
Built-in
mike
Network
Receiving and outputting audio from
the computer via the network (VN-V26U
only)
Receives audio that is input to a computer, and
outputs the audio to a speaker that is connected
to [AUDIO OUT] terminal of VN-V26U.
Speaker with
amplifier
VN-V26U
MAC address
Network
Note:
● Use of a headset for audio input/output of the
computer is recommended to prevent
howling.
14
Alarm
VN-V25U/26U comes with a motion detection
feature and dual alarm input.
By motion detection or alarm input, actions such
as mail delivery, message transmission via TCP/
UDP, alarm output can be triggered. These
actions can also be triggered by combination of
Headset
two alarm inputs.
Installing an FTP server enables uploading of
JPEG images before and after the alarm input
time (pre-/post-recording) to the server.
AAlarm PageB (A Page 47)
AJPEG Viewer ConfigurationB (A Page 84)
Computer
Restrictions on Clients
Headset
VN-V25U/26U enables users to authorize or
reject the acquisition of images by specific IP
address.
(A Page 66)
Control via customized application
software
Computer
The following uses are also possible by
developing a customized application software
that supports the API of VN-V25U/26U.
For details, please refer to AAPI GuideB in the
supplied CD-ROM.
● Monitors via the computer while at the same
● Performs recording by changing the frame
● Records the type and time of alarm
VN-V25U/26U
MAC address
Network
Sending JPEG images
before and after alarm
input to FTP
time records images to the HDD of the
computer.
size/frame rate during alarm occurrence.
occurrence on the computer.
Alarm Device
Computer