Table of Contents
Advertisement
Set the B&W/COLOR item to AUTO
1.
Select the item B&W/COLOR on the TITLE/VIDEO screen and press
the SET button.
The B&W/COLOR screen is displayed.
2.
Press the SELECTOR switch up or down (J, K) and select MODE.
3.
Press the SELECTOR switch left or right (H, I) and set to AUTO.
TITLE/VIDEO
SCENE Z
CAMERA TITLE EDIT..
W. BALANCE
SHUTTER..
GAIN..
B&W/COLOR..
E
BLC MODE
OFF
IRIS MODE
AUTO
S.E.C.
OFF
<MENU>RETURN <SET>SUB MENU
TITLE/VIDEO screen
B&W/COLOR
MODE
E
AUTO LEVEL
AUTO TIME
COLOR OVERLAY
<MENU>RETURN
B&W/COLOR screen
4.
Press the MENU button twice.
The setting is complete and the screen returns to the main menu.
Memo:
● Even when AUX MODE is set to B&W OUT , B&W OUT will not output in
B&W mode when the COLOR OVERLAY item of B&W/COLOR is set to
ON . To use B&W OUT signal in external illumination linkage, set COLOR
OVERLAY item to OFF .
● When near-infrared illumination is used, a B&W screen may switch to a
color screen if the object reflects light excessively. To perform switching
with higher accuracy, we recommend that you use the settings mentioned
in Control by B&W/Color switching signal from external (A Pg. 60).
● In the case of B&W/Color mode, the lens performance may cause the
image to be out of focus when the illumination of the object is near-infrared
light. In this case, use a lens that is compatible with near-infrared light.
AWC
SCENE
Z
COLOR
- - -
- - -
OFF
B&W/COLOR
MODE
E
AUTO LEVEL
AUTO TIME
COLOR OVERLAY
<MENU>RETURN
SCENE
Z
AUTO
NORMAL
30s
OFF
59
Advertisement
Table of Contents
