Flow for Connection/Settings
Follow the procedures below to connect/set this unit.
Turn off the power of devices to be used before connecting the cables.
Mounting the lens (A Pg. 20)
step 1
Mount the lens.
K
Connecting the back panel (A Pg. 22)
step 2
Connect the control signal cable, video signal coaxial cable
and the like.
K
Mounting the camera (A Pg. 25)
step 3
Mount the camera to the mounting location.
K
Adjusting the back focus (A Pg. 28)
step 4
Adjust the back focus.
K
Adjusting the lens (A Pg. 30)
step 5
Adjust the lens.
K
Adjusting the auto white balance (A Pg. 32)
step 6
19