Table of Contents
Advertisement
Introduction
Name of Parts and their Functions (continued)
Q
[RX TERM-OFF,ON/INT,LL] Function Selector Switch
[RX TERM-OFF,ON] RX Signal Terminal ON/OFF Switch
This sets whether or not the signal between RX+
control signal connection terminals L should be terminated at the value of
110K resistance.
ON
: Terminated at 110K.
OFF
: Not terminated at 110K.
If the system including the camera is the MULTIDROP (Multi DROP, RS-485)
system, only the last camera mounted along the control signal cable is set to
ON and the other cameras are set to OFF . (In the case of the
MULTIDROP system, it is necessary to set the MACHINE ID.)
If the system including the camera is the P TO P (Point to Point, RS-422A)
system, set this switch of all the cameras to ON . To switch between
communication systems, use the item STYLE on the COMMUNICATION
screen. (A Pg. 51)
(Default setting: ON)
[NT,LL] Selector Switch for Synchronizing System
This switch sets the synchronizing system for the camera.
INT
LL (Line Lock)
R
[POWER] Power indicator lamp
This lamp lights up when power is supplied to the camera.
S
Mounting Screw for Fall Prevention Wire
Use this screw when mounting the fall prevention wire to this unit. (Fall
prevention wire is not supplied with this product.)
Note:
● Connect the fall prevention wire to prevent this unit from falling accidentally.
T
AC 220 V-240 V power cord
This connects the camera to a commercial AC 220 V-240 V socket.
16
: This is set for internal synchronization (INT).
: This is set to synchronize the camera's vertical
synchronization to the power frequency.
(Default setting: INT)
C
D
and RX-
from the
Advertisement
Table of Contents
