Sharp SJ-WS320TS Service Manual page 33

3. Assembling procedures of R control cov. ass'y
1. Stick A-sealer rc-d to Damper ass'y.
2. Insert R-c box herness to Damper ass'y.
R-c box harness
3. Insert R-c box harness to Plasmacluster unit.
Insert Plasmacluster unit to R air guider a.
R air guider a
Plasmacluster unit
4. Fit Damper ass'y to R air guider a and fix R air guider b.
5. Fix 4) ass'y with Paper tape.
6. Stick A-sealer damper to 5) ass'y.
7. Stick Ra sealer a to 5) ass'y.
Plasmacluster unit
R-c box cover
Damper ass'y
A-sealer rc-d
Damper ass'y
OVER LAP
25~30
Paper tape Paper tape
(W30×220mm)
(W30×70mm)
>PS<
A216
Paper tape
(W30×70mm)
Damper ass'y
A-sealer rc-d
Damper ass'y
A-sealer damper
R air guider a
Ra sealer a
Paper tape
(W30×280mm)
Ra sealer a
>PS<
A217
R air guider a
R air guider b
A-sealer damper
A-sealer damper
33
Ra sealer a
R air guider b
Ra sealer a
Damper ass'y
SJ-WS320T-S