Mode For Display - Sharp SJ-WS320TS Service Manual

SJ-WS320T-S

[ 10 ] MODE FOR DISPLAY

1) Entering method of the mode
Within 2 minutes after main power input, press the [
refrigerating room door.
2) Release of the mode
Press the [ ] button over 5 seconds at the opening condition of the refrigerating room door.
(Even without the above operation, release can be made by main power OFF.)
3) Movement in the mode
1. Compressor, fan motor, heater and Plasmacluster are stopped.
2. Damper is always made [CLOSE] condition.
3. Indoor lamp is lit when door is open.
4. LED display
• LED display will be displayed in turn automatically.
5. Door alarm is not operated.
button
] button over 5 seconds at the opening condition of the
30