Specifications - JVC TD-EX90 Instructions Manual

Specifications

Audio performance
Frequency response (–20 dB recording)
Input/Output Terminals
General
Accessories
Signal-to-noise ratio
Wow and flutter
ANALOG IN (REC)
ANALOG OUT (PLAY)
Format
Track System
Tape Speed
Heads
Motors
Fast forward / Rewind time
Power requirements
Power Consumption
Dimensions
Mass
Audio pin cord
Compu Link cable
AC power cord
Design and specifications are subject to change without notice.
Type IV tape :30 Hz to 17 kHz (40Hz to 17kHz ( 3 dB))
Type I I tape :30 Hz to 16 kHz (40Hz to 16kHz ( 3 dB))
Type I tape :30 Hz to 15 kHz (40Hz to 15kHz ( 3 dB))
54 dB
(S=315 Hz , k3=3% , N=A-weighted , Type IV tape)
The S/N is improved by about 15 dB at 500 Hz and
by max. 20 dB at 1 kHz to 10 kHz with Dolby C NR
on and improved by 5 dB at 1 kHz and by 10 dB at
above 5 kHz with Dolby B NR on. MOL Improved 4
dB at 10kHz
0.09%(WRMS)
Input level / Impedance : 220mV (0 VU) / 19 kohms
Output level / Impedance : 300mV (0 VU) / 2.9 kohms
Compact Cassette Stereo
4-track , 2channel
4.8 cm/sec. (1-7/8inch/sec.)
Record/Playback : METAPERM head
Erase : 2-gap ferrite haed
Capstan : Electronic govemed DC moter
Tray:DC motor 1
Approx. 120 sec. with C-60 cassette
AC120 60Hz
7watts (OPERETE ON) , 3watts (OPERETE STANDBY)
200 80 305 mm (W
(7-7/8 3-3/16 12-1/16 inches)
2.4 kg (5,3 lbs)
(2)
(1)
(1)
1
H D)
21
TD-EX90