Specifications; Typical Installations; Fully; Ully Ucted Ystem - vanEE NOVO+ 100H Installer Manual

2. TECHNICAL DATA (
2.5 S
PECIFICATIONS
M
ODEL
W
EIGHT
P
ORT DIAMETER
D
RAIN DIAMETER
I
NSTALLATION
M S H
OTOR PEED IGH AND LOW SPEED FACTORY SET
E S
LECTRICAL UPPLY
P C
OWER ONSUMPTION

3. TYPICAL INSTALLATIONS

There are two common installation methods.
3.1 F D S
ULLY UCTED YSTEM
(Primarily for homes with radiant hot water or electric baseboard heating.
See illustration at right.)
Moist, stale air is exhausted from the high humidity areas in the home, such as
bathrooms, kitchen and laundry room.
Fresh air is supplied to bedrooms and principal living areas.
3.2 S C
YSTEM OMBINED WITH A
(For homes with forced air heating. See illustration at right.)
Moist, stale air is exhausted from the high humidity areas in the home, such as
bathrooms, kitchen and laundry room. Fresh air is supplied to the cold air return
or the supply duct of the furnace.
NOTE: For this type of installation, it is essential that the furnace blower runs
when the unit is in operation.
' )
CONT D
NOVO+ 100H
65 . (29.5 kg)
LB
6˝ (152 )
MM
1/2˝ (12 )
MM
C (
HAINS AND SPRINGS PROVIDED WITH THE UNIT
(
OPTIONAL INCREASED LOW SPEED
120 V, 60 H
Z
160 W
ATTS
F
URNACE
NOVO+ 200H
65 . (29.5 kg)
LB
6˝ (152 )
MM
1/2˝ (12 )
MM
)
)
120 V, 60 H
Z
195 W
ATTS
VH0077
VH0087
5
See 4.5.1 for details
See 4.5.2 for details