Table of Contents
Advertisement
QUICK OPERATION GUIDE (D.S.C.)
A still image you shoot is stored in the camcorder's built-in memory.
SUPPLY POWER
A
BATTERY RELEASE
Using the battery pack
Hook its end to the camcorder
battery pack in until it locks in place
(Charging procedure,
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery
pack.
PLAYBACK
Next/Previous Page
3
(2/PAGE – or 3/PAGE +) Buttons
1
Set the System Select Switch to "D.S.C.".
2
Set the Power Switch to "PLAY".
— A still image stored in memory appears.
3
Press 2/PAGE – or 3/PAGE + to select the
still image you want to view.
(For more details,
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
Hook on.
Push in.
B
and push the
.
pg. 10)
2
Set to "PLAY".
1
Set to "D.S.C.".
pg. 44.)
SHOOTING
4
SNAPSHOT Button
2
Set to "D.S.C.".
1
Turn the LENS COVER Open/Close Ring to
open the lens cover.
2
Set the System Select Switch to "D.S.C.".
3
Set the Power Switch to "AUTO" or "PRO.".
— The power lamp will light and an image
will appear.
4
Press the SNAPSHOT Button.
— A still image is shot and is stored in the
camcorder's memory.
(For more details,
pgs. 20 – 22)
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
7
EN
1
LENS COVER
Open/Close Ring
3
Set to "AUTO"
or "PRO.".
Advertisement
Table of Contents
