Table of Contents
Advertisement
Do not expose the Product to extreme temperatures (below -40 °C
or above +60 °C) or chemicals that may soften, crack, or otherwise
damage the plastic housing.
Although the Product is water resistant, do not expose it to water. If
needed, dry the Product completely and check for proper operation
before use. See Periodic Performance Checks. (If a test plug is
unavailable, a 110 V ac to 120 V ac, 60 Hz source may be temporarily
substituted with caution.)
Do not drill, punch, engrave, or otherwise modify the housing of the
Product. Do not use adhesives, adhesive labels, inks, solvents, on
the Product or expose the Product to chemicals which may alter the
housing. If you deface or alter the Product, you may lower or
destroy the Product's sensitivity to hazardous voltages and will void
the warranty.
Keep the conductive cap over the probe end of the Product when
the Product is not in use to avoid damage to the tip and a possible
hazard to the user. The carbide tip is sharp and may pose a hazard to
the user.
Do not subject the Product to possible pressure or damage from
other tools or material. Pressure may cause the switch to operate
and discharge the battery. Do not store the Product near strong
magnets.
Clean the Product with a soft cloth, mild soap, and water.
Symbols
Table 1 lists the symbols that can be used on the Product or in this document.
Symbol
Consult user documentation.
WARNING. RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
Earth ground
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not discard
this electrical/electronic product in domestic household waste.
Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do not dispose of
this product as unsorted municipal waste.
Table 1. Symbols
Description
Voltage Detector
Symbols
3
Advertisement
Table of Contents
