Cd Player Error Codes; Disc Eject - Jensen Phase Linear SD1413 Owner's Manual

SD1413
Disc Repeat (RPT)
Press the 3 RPT button (21) during disc play to
continuously repeat the selected track. "S--
RPT" will appear in the display. Press 3 RPT
again to stop repeating. "S--RPT" will disappear
from the display, and regular play will resume.
The repeat function will also be canceled when
activating the scan or shuffle functions.
Disc Shuffle (RDM)
Press the 4 RDM button (22) during disc play to
play all tracks on a CD in random, shuffled
order. "S--SHF" will appear in the display. Press
4 RDM again to stop random play. "S-SHF" will
disappear from the display and regular play will
resume. The shuffle function will also be
canceled when activating the scan or repeat
functions.

Disc Eject

Press the eject button (12) to stop CD play and
eject the disc. The unit will change to tuner or
AUX operation, depending on which mode was
in operation prior to disc play. If the disc is not
removed from the unit within 15 seconds, the
disc will be reloaded to prevent accidental
damage. Disc play can be resumed by pressing
SRC (2) to choose the CD player function.

CD Player Error Codes

If a problem should develop while operating the
CD player, "Disc Error" or "Error 1" may appear
on the display panel. If "Disc Error" appears, try
ejecting and reloading the disc into the player.
While the disc is out of the unit, make sure it is
clean and undamaged, and then load it
correctly. "Error 1" can indicate a number of
problems with the unit, including a mechanical
error or an error in the microprocessor control
of the player. Pressing the reset button (26)
may help, but will erase the time and preset
memory. If the suggested measures do not
solve the problem, contact an approved
warranty station near you for further assistance.
9
SERIES