Setting Printer Alignment; Alignment - MicroBoards Technology GX-2 User Manual

MICROBOARDS TECHNOLOGY, LLC

Setting Printer Alignment

Alignment

The GX-2 Disc Publisher system has been aligned at the factory. The factory alignment values are on
a label on the back of the GX-2 Disc Publisher. Follow these steps to enter the factory values:
1. Launch your Disc Publishing software
and configure the Disc Publisher if this
has not already been done. (see page
17).
2. Place inkjet printable media into the
input hopper.
3. Click on the Start Button on your
Windows computer.
4. Select Settings and then Printers.
5. Right click on the Microboards GX
Series icon.
6. Select Printing Preferences.
7. Select the Alignment Tab.
8. Select the Resolution of
aligning the printer.
9. Enter the values listed with the GX-2
Disc Publisher into the Top and Left
Side boxes.
10. Click the Apply button. Do not close the Printing Preferences at this time.
11. Print a full image disc using PrintWrite or Zulu2. Please refer to the user manuals for details
on doing so.
12. A disc will be dropped onto the belts and then printed. Once printing is complete, the disc will
be ejected into the output hopper.
13. Examine the printed disc to determine if the alignment is correct. If not, adjust the Top and
Left Side alignment values in the Printing Preferences according to the graphic on the
Alignment tab and repeat steps 11 through 13 with a new disc.
14. Click the OK button on the Printing Preferences once the alignment is complete to close the
window.
13
.1mm when
GX-2 DISC PUBLISHER