Jacuzzi J - 355 Owner's Manual page 36

J-300 Series
e
Lift unthreaded filter
cartridge from skimmer
well.
H
Place each cartridge
back into skimmer
well, then rotated
each cartridge handle
clockwise to thread back
into wall fitting. DO NOT
OVERTIGHTEN!
32 32
F
If used, remove the
chemical feeder as
instructed prior to rinsing
the filter cartridges.
Rinse debris from filter
pleats on each cartridge
using a garden hose and
high pressure nozzle.
Start at the top and
work downward towards
handle. Repeat until all
pleats are clean.
I
(Filter Cover Back View)
Install clean skimmer
bag back onto the filter
cover clips as shown.
G
Trapped
Air
Bubbles
Submerge both filter
cartridges in spa. Tilt
threaded end upward
to remove trapped air
bubbles, then keep
cartridges submerged to
prevent air entrapment
during installation (step
H).
J
1. Tilt filter cover back
against clips, then lift
approx. 3/8" to latch
against spa shell.
2. Turn power to spa
back on.