Energizer Homepower HP-6M Series Owner's Manual
  1. Manuals
  2. Brands
  3. Energizer Manuals
  4. Audio & Video Accessories
  5. Homepower HP-6M Series
  6. Owner's manual

Energizer Homepower HP-6M Series Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
HP-6M (Main Unit) HP-6S (Sub Unit)

Advertisement

Table of Contents
loading

Summary of Contents for Energizer Homepower HP-6M Series

  • Page 1 OWNER'S MANUAL HP-6M (Main Unit) HP-6S (Sub Unit)

  • Page 2: Table Of Contents

    8 Star Energy Pty Ltd. Electrical Specifications All other brand names are trademarks of their respective owners. Neither 8 Star Energy Pty Ltd nor Energizer Standard Operation Brands, LLC is affiliated with the respective owners of their trademarks.

  • Page 3: Important Safety Instructions

    All installations must comply with local and national electrical standards. Read the entire document before installing or using the Energizer Homepower HP-6 Series. Failure to follow any instructions or warnings in this WARNING: This indicates a situation where failure to follow instructions may be a safety hazard document may result in electrical shock, serious injury, and death or may damage the battery, potentially rendering or cause equipment malfunction.
  • Page 4 “Must Energize by Date” located on the packaging. Energizer Homepower HP-6 Series units can present a risk of high short-circuit current. If an Energizer Homepower HP-6 Series unit needs to be replaced or removed, it must be turned off Observe the following precautions when operating the system: as per the recommended shutdown procedure prior to removal.

  • Page 5: Product Overview (Energizer Homepower Hp-6 Series)

    1. Automatic Mode - is the default mode of operation. The system determines the energy supply requirement a high degree of customisation to suit a variety of energy considerations. The Energizer Homepower HP-6 Series is with the priority: Site Loads > Battery Charge > Grid Export > Battery Discharge > Grid Import.
  • Page 6 2. Semi-Automatic Mode - is an optional mode. The system allows for a certain percentage of the solar 3.4. Grid Charge - Specifies when to use the grid to charge the battery. If left unticked, Energizer Homepower generation to be reserved towards battery charging and/or export to grid. The system determines the energy will not charge from the grid.

  • Page 7: Electrical Specifications

    Standard Operation Ingress Protection IP65 The Energizer Homepower HP-6 Series system is designed for both indoor & outdoor installations and can be monitored using a variety of interfaces including Edge Lighting, an LCD panel, the Energizer Homepower App (Operating Charge: 0 to 45 °C, Temperature Range) Discharge: -20 to 50 °C...

  • Page 8: Monitoring Your System

    Wi-Fi, 4G (LTE) and/or Ethernet for internet connectivity and communication with the Energizer Homepower Cloud. It is essential to connect the HP-6 Series system to the Energizer Homepower Cloud to enable real- time monitoring and remote device troubleshooting. When selecting the method of communication, it is...

  • Page 9: Internet Connection

    If the router has been moved, try moving it closer to the Energizer Homepower unit and wait a few minutes to see if the system picks Step 7.

  • Page 10: Maintenance

    When normal system operation is interrupted, the Edge Lighting will display the respective operating state i.e., fault, as described in Table 2 (on page 13). If this is the case, refer to the Energizer Homepower App or Customer Portal to identify the system issue and resolve fault.

  • Page 11: Step 2 - Shut Down Sequence (Hp-6M/Hp-6S)

    Battery Isolator and the LCD. Step 3 – Power On Sequence (HP-6M/HP-6S) In order to power on the Energizer Homepower HP-6 Series system, you will be required to follow the procedure listed below: Note: On the Battery Isolator, Red indicates ON and Green indicates OFF.

  • Page 12: Emergency Procedures

    5. First Aid Measures 4. Emergency Procedures The Energizer Homepower HP-6 Series has a lithium ion battery that contains several chemicals and organic If the battery is physically damaged & results in battery leakage, the following measures must be taken to reduce electrolytes, which are hermetically sealed within a metal enclosure.

  • Page 13: Safety Datasheet

    4. First Aid Measures Level 1, 12 Risley Street, The Energizer Homepower HP-6 Series has a lithium ion battery that contains several chemicals and organic Richmond VIC 3121 electrolytes, which are contained within a sealed metal enclosure. There is no risk of chemical exposure under AUSTRALIA routine use of the unit’s specific application.
  • Page 14 Energizer Homepower HP- Series Energizer Homepower HP- Series 4.1.2. Most Important Symptoms Caused by Exposure: 6.4. Waste Disposal Method: • It is recommended to discharge the batteries entirely and handing over the abandoned batteries • Adverse effects not expected to occur from this product. Long term exposure may cause to the appropriate hazardous chemical disposal authority.
  • Page 15 Energizer Homepower HP- Series Energizer Homepower HP- Series 8.2. Exposure Controls 8. Exposure Controls & Personal Protection 8.2.1. Engineering Controls 8.1. Control Parameters • Ensure adequate ventilation, especially in confined areas. 8.1.1. Occupational Exposure Limit Values: • Ensure that eyewash stations and safety showers are close to the workstation.
  • Page 16 Energizer Homepower HP- Series Energizer Homepower HP- Series 11. Toxicological Information 13. Disposal Considerations Under normal conditions, any contact with a fully sealed, protected battery is non-toxic. If the battery is opened, Waste Chemicals - if batteries are still fully (or partially) charged or discharged, they can be considered a the exposure to internal contents such as corrosive fumes can cause irritation to skin, eyes, and mucous reactive hazardous waste.

  • Page 17: Limited Warranty

    1. Product Warranty [DSL] Canadian Domestic Substances List We warrant that your Energizer Homepower HP-6 Series products will be free from defects for a period of 10 [IECSC] China Inventory of Existing Chemical Substances years following the earlier of (a) three months from the battery’s date of manufacture or (b) the initial installation...
  • Page 18 Please bear in mind these upgrades may interrupt the operation of your product for instructions in the product owner’s manual. a short period. If your product is not registered or connected to the internet (Energizer Homepower Cloud) for an •...

  • Page 19: I&C Checklist

    Following the Installation of the Energizer Homepower HP-6 Series, please ensure that the system owner or defects. If you are unable to contact the Energizer Homepower authorised resellers, or if you purchased your nominated representative is provided the following information: product directly from Entel, you must contact us using the email address or telephone numbers listed below, raise a service request with Entel, and obtain a Return Merchandise Authorisation (RMA) number.
  • Page 20 Table G5 of AS/NZS Risk Assessment 5139:2019 Clause • Arc flash boundary - 3.2.4.2.1 to determine 23.38 cm. arc flash incident Energizer Homepower [Model No.] HP-6M HP-6M/1S HP-6M/2S HP-6M/3S energy. • PPE level - use PPE level 1 When working...
  • Page 21 Energizer Homepower HP- Series Energizer Homepower HP- Series Hazard Inherent Residual Potential Controls Notes: Description Potential Source Risk Risk Consequences STEP 3 STEP 1 STEP 2 STEP 4 • Follow manufacturers Explosive gas Burns to eyes and skin: advice on Installation...
  • Page 22 Energizer Homepower HP- Series Energizer Homepower HP- Series Notes: Notes: V23-00211 © Energizer 2021 V23-00211 © Energizer 2021...
  • Page 23 energizerhomepower.com...

This manual is also suitable for:

Homepower hp-6m/1s seriesHomepower hp-6m/2s seriesHomepower hp-6m/3s seriesHomepower hp-6s3 series

Table of Contents