Teka DHT 97670 User Manual page 19

CONTROL INSTRUCTION
The remote control will arrive already programmed with the hood, if for any reason the remote
control loses communication with the hood, perform the following procedure:
· Disconnect the hood from the power supply;
· Wait a few seconds and restore the power and within 10 seconds press the "P1" and "PT"
buttons at the same time for about 3 seconds.
The remote control will be operational again.
FUNCTIONS
P0: MOTOR ON / OFF key.
If selected with the engine off, the display shows a zero "0" for about 1 second.
P1: key to decrease the motor speed, if the hood is in 1st speed it switches off the motor.
P2: key to increase the motor speed, if the hood is off it switches on the 1st speed, pressing a
second time activates the 2nd speed, pressing a third time activates the 3rd speed, pressing a
fourth time activates the 4th speed, pressing a fifth time activates the 5th speed (1st speed
intensive) (**), pressing a sixth time activates the 6th speed (2nd speed intensive) (**).
The numbers of the selected speeds appear on the display ("1", "2", "3", "4", "5", "6").
19