Chacon 34035 User Manual page 27

c) Check that there are no devices with strong electromagnetic fields near the door/window sensor. Strong electro-
magnetic fields can cause false alarms.
2. The main unit doesn't receive a signal from the transmitter
a) Check if the pairing between the transmitter and the main unit was successful.
b) If pairing was successful, check the battery voltage of the main unit and transmitter. Low voltage will result in
product failure.
3. No alarm sounds after a detection
a) Check if the low battery indicator is flashing (please replace the batteries immediately).
b) If the unit is armed and set to HOME mode and the PIR sensor detects an intrusion, the alarm will not sound. The
PIR sensor is disabled in HOME mode. Check if the main unit is installed correctly.
6. Add a device to your existing alarm
We have created a 100% compatible alarm system to meet your needs. Here, we offer accessories that can work
alone but also as a kit. This allows you to personalise your alarm and to associate several accessories but also several
alarms between them. For example, when a person triggers the opening detector, all your alarms will sound. You can
deactivate your alarm using the code units, remote control or the remote keyboard.
More information on our website: https://chacon.com/fr/
Compatible products: 34036, 34038, 34043, 34044, 34045, 34046, 34048
7. Safety advice
• Don't mix new and used batteries.
• Don't mix alkaline, standard (zinc carbon) or rechargeable (ni-cad, ni-mh, etc.) batteries.
• Please use only the type of battery specified in the manual.
• Don't leave used batteries lying around in the unit, as this may damage the unit.
• Incorrect use of the battery may damage nearby objects and result in fire or serious injury.
• Please keep batteries away from children. If you suspect that batteries have been ingested, seek medical attention
immediately. Swallowing the battery can lead to serious consequences; internal burns within 2 hours or death.
• Recycle used batteries in accordance with environmental protection practices
• Don't place the unit near a heat source, where it may be exposed to direct sunlight, rain or strong light.
EN