Setting Cooking Program And Starting; Interrupt The Cooking Process - Silvercrest SSM 1000 A2 Operating Instructions Manual

10.3 Setting cooking
program and starting
NOTE: the cancel button Keep Warm/
Cancel 37 allows you to cancel the set-
tings or a running program at any time.
1. Press the desired program button. The
LEDs above the program button and
above the Start button Start 44 will
flash. The display 29 shows the cook-
ing time set as Normal 51 and the pre-
set cooking time will flash.
As long as the LEDs and the display are
flashing, the settings for the time and pres-
sure level can be changed.
NOTE: the preset values and the adjustable
ranges can be found in the table in chapter
"Overview of functions" on page 53.
2. If desired, first change the pressure level:
Press the pressure button Pressure
Level 40 to switch between High 54
and Low 56.
3. The change the cooking time within the
adjustable range:
- Repeatedly press the program button
to switch between the default settings
Less, Normal, More 51.
- You can use the buttons + 33/– 46 if
necessary to set the desired time man-
ually.
- By keeping the buttons + 33/– 46
pressed, you can cycle through the
values faster.
4. Briefly press the Start button Start 44
to start the cooking program.
- The LEDs above the selected program
button and above the Start button
Start 44 will be lit continuously.
- The display 29 will show ON and a
running progress bar 55, indicating
that the device is heating up and
building up pressure.
57 This symbol indicates that
the device is heating up
and building up pressure.
- This may take some time depending
on filling volume and cooking pro-
gram.
5. When the temperature and pressure
have been reached, the cooking pro-
gram starts automatically.
- The display 29 counts down the
cooking time.
53 This symbol indicates that
P
the set pressure has been
reached.
- In order to maintain the temperature,
the device automatically switches
back and forth between heating up
(progress bar 55 running) and heat-
ing switched off (progress bar 55 sta-
tionary).
6. The end of the cooking process is sig-
nalled by beeps. The device automati-
cally switches to the warm program.
The LED of the Cancel button Keep
Warm/Cancel 37 is lit. The dis-
play 29 counts the warm time upwards
from 00:00. The pressure is slowly re-
leased.
10.4 Interrupt the cooking
process
• To cancel a running program, press the
Cancel button Keep Warm/Can-
cel 37.
The device is then in standby mode. The
display 29 will show OFF.
61
GB