Tie Routing Table - Panasonic LX-TD500 Programming Manual

8.2 TIE Routing Table

Used to specify trunk groups and parameters required for making TIE calls.
This table is referenced by the system to identify the trunk route, when an extension user made
a TIE call by dialing the feature number for "TIE Line Access" or "Other PBX 01-16."
The first 3 digits (other than TIE Line Access Code) of the dialed number decide a routing
pattern appropriate for each call. Up to 36 routing patterns can be programmed in this table.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Entry No.
01-08
01-36
Specifies the entry number of Routing Table which you are going
to program.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
PBX Code
Blank
Up to 3 digits consisting of 0-9
Specifies the ID code for your PBX.
(Required when your PBX is a part of a TIE Line Network.)
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Private Network
299