Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Card No.
—
XXX: YYY [XXX: Card No. (101-314), YYY: Card Type]
Specifies the physical number of the extension card and its type,
which you are going to program.
• 1.2 Slot Assignment (P/G)
Port No.
1
1-n [n= 4 (OPX), 8 (PLC/HLC/SLC/SLC-M), 16 (DLC/DHLC/
ESLC), 24 (T1 [OPX])]
Specifies the extension port which you are going to program.
Note
• Port Nos. 17-32 will be displayed when "DN" and "Group
No." for "Ext No.2" are assigned in "1.5 VPS (DPT) Port
Assignment (Section 1.5)."
• 1.4 Extension Port Assignment (P/G)
DN
—
3-4 digits consisting of 0-9
Specifies the extension which you are going to program.
• 2.3 Numbering Plan (P/G)
Group No.
(Display only)
1-128
Displays the Extension Group to which the selected extension port
is assigned.
Note
• Default Group No. for Ext. 1001 is 128.
• 3.3 Extension Group (P/G)
Line
213
Advertisement
Table of Contents
