Panasonic LX-TD500 Programming Manual page 28

Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
28
Inter-digit Pause
830 ms
1.
630 ms
2.
830 ms
3.
1030 ms
Used to distinguish between pulse signals. To meet the
requirements of other PBX or Central Office, select the appropriate
value that represents the delay between dial pulses.
(This setting is only required when using dial pulse trunks.)
• 1.3 System Features (F/G)
– T1 Carrier
Flash Detection
No
1.
Yes
2.
No
Activates or deactivates the detection of Flash signal transmitted
from other PBX which is connected to this system via TIE Line.
If set to "No," the system does not recognize a switchhook flash.
• 1.3 System Features (F/G)
– T1 Carrier
Flash Detection Timer
208-1016 ms
1.
208-1016 ms
2.
80-1016 ms
3.
208-1544 ms
4.
80-1544 ms
Specifies the time range in milliseconds that the system requires to
recognize a switchhook flash.
• 1.3 System Features (F/G)
– T1 Carrier
Programming Guide