Bosch HB Series User Manual And Installation Instructions page 18

en Home Connect
13.3 Discarding changes to the basic
settings
14 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
14.2 Home Connect Settings
You can adjust the settings and network settings for Home Connect in the basic settings for your appliance.
The settings shown in the display depend on whether Home Connect is set up and whether the appliance is connec-
ted to the Wi-Fi.
Basic setting
Setting with the as-
sistant
Appliance info ​ ⁠
Wi-Fi
Disconnecting the
network
Connect to app
Connect to other app
Software update
18
Possible settings
-
-
On
Off
-
-
-
Touch the ​ ⁠ button.
▶
a All changes are discarded and not saved.
14.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Download the Home Connect app.
1.
2. Open the Home Connect app and scan the follow-
ing QR code.
Follow the instructions in the Home Connect app.
3.
Explanation
An assistant guides you through the set-up and settings of
Home Connect.
If you select the appliance information, the display shows in-
formation about the network or the appliance.
If Wi-Fi is activated, you can use Home Connect.
In networked standby mode, the appliance requires max. 2 W.
If you disconnect from the network, the network information is
retained.
After switching on the appliance, it may take a few seconds
until the appliance has established the connection to the net-
work.
The setting starts the connection between the Home Connect
app and the appliance.
The setting is only displayed if an update is available.