Bosch HB Series User Manual And Installation Instructions page 11

Changing the temperature
You can change the temperature at any time.
8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
Only use rapid heating when a temperature of over
100 °C has been set.
You can use rapid heating for the following types of
heating:
¡ 3D hot air ​ ⁠
¡ Top/bottom heating ​ ⁠
¡ Intensive heat ​ ⁠
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
Use the ​ ⁠ button to select the different time-setting op-
tions.
Time-setting Use
option
Timer ​ ⁠ The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time If you set a cooking time for the op-
​ ⁠ eration, operation of the appliance
stops automatically once this time
has elapsed.
End ​ ⁠ For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 24 hours. The timer
has its own audible signal so that you can tell whether
it is the timer or a cooking time which has elapsed.
Touch the ​ ⁠ button.
1.
​ ⁠ appears in the display.
a
Use the temperature selector to set the timer dura-
2.
tion.
The timer duration can be set in 30-second incre-
ments up to 10 minutes. The time increments then
become bigger as the value increases.
Press the ​ ⁠ button to confirm.
3.
Use the temperature selector to set the required
▶
temperature.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Press the ​ ⁠ button.
2.
a ​ ⁠ appears in the display.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, an audible signal
sounds and the ​ ⁠ symbol goes out in the display.
Place the food in the cooking compartment.
3.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed:
4.
Press any button to switch off the timer.
‒
Changing the timer
You can change the timer duration at any time.
Requirement: ​ ⁠ is highlighted in the display.
Use the temperature selector to change the timer
▶
duration.
a The appliance applies the change after a few
seconds.
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: ​ ⁠ is highlighted in the display.
Use the temperature selector to reset the duration of
▶
the timer to zero.
a After a few seconds, the appliance applies the
change and ​ ⁠ goes out.
9.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and temperature or
setting have been set.
Touch the ​ ⁠ button.
1.
Use the function selector to select the cooking
2.
time ​ ⁠ .
Use the temperature selector to set the cooking
3.
time.
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments.
Rapid heating en
11