Connection Of Water Hose To The Jug - Beko GNE V422 X Manual

A
Warning: Water filter cleans some
foreign particles in the water. It does not
purify water from microorganisms.
A
Warning: Ice Off button must
always be pressed during replacement
of the water filter or installing the by-
pass cover.
Connection of Water Hose to
the Jug
(in some models)
To connect water to the refrigerator
from a jug, a pump is needed. Follow
the instructions below after connecting
one end of the water pipe coming
out of the pump to the refrigerator as
described on the previous page.
1. Finish the connection by pushing the
other end of the water pipe into the
water pipe inlet of the pump as shown
in the figure.
2. Put and fix the pump hose into the jug
as shown in the figure.
3. After completing the connection, plug
in and run the pump.
To provide an efficient operation of the
pump, wait for 2-3 minutes after
starting the pump.
C
Note: You may refer to the user
manual of the pump while making the
water connection.
1a
1b
2
17 EN