Using The Water Spring; Spillage Tray - Beko GNE V422 X Manual

Hide thumbs Also See for GNE V422 X:
Table of Contents

Advertisement

Available languages

Available languages

Using the water spring

Warnings
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
In cases where the water dispenser
has not been used frequently, sufficient
amount of water must be drained from
the dispenser to get fresh water.

Spillage Tray

Water drops that drip during use,
accumulates in the spillage tray. You
can remove spillage tray by pulling it
to yourself. You can remove the water
with a sponge or a soft cloth.
Sliding Body Shelves
Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to
a stop point when pulled towards front
to allow you reach the foods placed at
the back of the shelf; when it is pulled
after slightly lifting upwards at the
second stop point, the body shelf will
be released.
The shelf should be held tightly from
the bottom as well in order to prevent
it from tipping over. The body shelf is
placed on the rails at the sides of the
refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed
backwards to seat it completely.
26
EN
1
2
3
4

Advertisement

Table of Contents
loading

Table of Contents