Using The Serial Terminals; Examples Of Connection; Pin Assignments And Signal Names; Communication Conditions (Factory Setting) - Panasonic PT-D5700U Service Manual

3. HPLL
When non-standard signal of VIDEO/S-VIDEO is inputted (VTR, VHD, etc.), horizontal synchronization might be disordered
according to connected equipment. In this case, set HPLL to OFF.

5 Using the Serial Terminals

SERIAL terminals which are on the side-mounted connection terminals conform to RS-232C standard. This projector can be
controlled by a PC which is connected as shown below. Also SERIAL OUT terminal is provided to enable plural projector control.
5.1.

Examples of Connection

5.2.

Pin Assignments and Signal Names

5.3.

Communication Conditions (Factory Setting)

All manuals and user guides at all-guides.com PT-D5700U / PT-D5700E / PT-D5700UL / PT-D5700EL / PT-DW5100U / PT-DW5100E / PT-DW5100UL / PT-DW5100EL
13