Torque - Axis E1 Owner's Manual

① Locknut
③ Special wrench
·A special wrench can be obtained at a HSUN dealer to make this adjustment.
·The spring preload setting is determined by measuring distance A, shown in the
illustration. The shorter distance A is, the lower the spring preload; the longer distance A
is, the higher the spring preload. With each complete turn of the adjusting nut.
① Distance A
3. Tighten the locknut.
NOTE:
Always tighten the locknut against the adjusting nut, and then tighten it to the specified

torque.

Rebound damping force
Turn the rebound damping force adjusting screw in direction S to increase the rebound
damping force and thereby harden the damping, and in direction F to decrease the rebound
damping force and thereby soften the damping.
MAINTENANCE
② Spring preload adjusting nut
65