Kobalt KSPM 1040B-03 Manual page 15

ASSEMBLY
5. Attaching/Removing the Side-Discharge
Chute
WARNING
• Do not at any time make any adjustment to the
lawn mower without first stopping the motor,
removing the battery pack, and waiting for the
blade to stop rotating.
a. Remove the battery.
b. Lift the side-discharge door (S).
c. Align the holes of the side-discharge chute (T)
with the protrusions of the doorsill. Release
the side-discharge door and make sure that it
locks firmly against the side-discharge chute.
d. To remove the side-discharge chute, lift the
side-discharge door, grasp the side-discharge chute and pull it out.
6. Cutting-Height Adjustment
WARNING
• Do not at any time make any adjustment to the
lawn mower without first stopping the motor,
removing the battery pack, and waiting for the
blade to stop rotating.
• Keep your feet away from the deck when
adjusting its height.
The mower can be set to any of 6 cutting heights
between 1-3/16" (30mm) and 4" (100mm). Choose
the proper cutting height according to the type and
condition of the grass.
a. Grasp the cutting height adjustment lever (R)
and move it outwards.
b. Move the lever toward the back or the front of the mower and engage the lever in the
desired cutting-height position on the mower deck.
5
Protrusion
Hole
T
6
15
S
R