Functional Description - Milwaukee 2718-20 Operator's Manual

M18 fuel 1-3/4" rotary hammer with one-key

Hide thumbs

Table Of Contents

Table of Contents

Available languages

another. Shorting the battery terminals together may

cause burns or a fire.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specified in the instructions.

Charging improperly or at temperatures outside the

specified range may damage the battery and increase

the risk of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

ROTARY HAMMERS

• Wear ear protectors. Exposure to noise can cause

hearing loss.

• Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

• Hold power tools by insulated gripping surfaces,

when performing an operation where the cutting

tool may contact hidden wiring. Cutting accessory

contacting a "live" wire may make exposed metal

parts of the power tool "live" and could give the

operator an electric shock.

• Keep hands away from all cutting edges and

moving parts.

• Cut embedded rebar only if this operation does

not affect the integrity of the building. If in doubt,

consult a structural engineer. Tool operator fully

responsible for adverse structural effects.

•

To reduce the risk of injury, when

WARNING

working in dusty situations, wear

appropriate respiratory protection or use an

OSHA compliant dust extraction solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

No-Load Revolutions per Minute (RPM)

BPM

Blows per Minute (BPM)

Anti-Vibration System

Read Operator's Manual

UL Listing for Canada and U.S.