Table of Contents
Advertisement
1. Update Contents
Item
1
B/E
Update B/E FIRMWARE
2
F/E
Update F/E FIRMWARE
2. Update
1. Turn the power on and remove the disc in the tray.
2. To switch the DVD/VCR with HDD recorder into
the HDD mode, press [HDD] on the remote control
unit.
3. To put the DVD/VCR with HDD recorder into
version up mode, press [VARIABLE SKIP] and [6],
[5], [4] buttons on the remote control unit in that
order within 3 seconds. The tray will open
automatically.
Fig. a appears on the TV screen and Fig. b
appears on the VFD.
*FIRMWARE version will differ depending on the
model. Fig. a is an example.
DISC UPDATE
Please Insert F/W Disc
Fig. a: Update Mode TV Screen
Fig. b: VFD Display in Update Mode
FIRMWARE RENEWAL MODE
Status
4. Load the update disc.
The TV screen will display Fig. c.
- If the update disc contains only a single file, the
update will initiate automatically when the disc is
inserted.
*FIRMWARE version will differ depending on the
model. Fig. c is an example.
<DIR>
BE
<DIR>
FE
Fig. c: Update Disc TV Screen
Effective FIRMWARE update files will have the file
extensions shown below.
File extension
BIN
MOT
5. Select the desired FIRMWARE to be updated with
the arrow button and press the [ENTER] button.
FIRMWARE will automatically select the
appropriate F/E or B/E version.
Fig. d appears on the TV screen and Fig. e
appears on the VFD, and the update will start.
*FIRMWARE version will differ depending on the
model. Fig. d is an example.
*1
TARGET: B/E
*2
STATUS: EXECUTING
DISC UPDATING xx% Complete
Fig. d: TV Display during update
The status displayed in *1 is as shown below.
Display
B/E
FIRMWARE B/E
F/E
FIRMWARE F/E
UNKNOWN
Not FIRMWARE B/E or F/E
1-10-1
DISC UPDATE
Status
B/E FIRMWARE file
F/E FIRMWARE file
DISC UPDATE
Status
E4340FW
Advertisement
Table of Contents
