Advertisement
Installation—Digital Audio Models
6. Making sure the Duet's captive screws are engaged properly in
the threaded posts, tighten each of the three screws and secure
the card snugly to the logic board; do not overtighten the
screws (Figure 27).
WARNING:
When your computer is operating, the Duet's heat
sink will become VERY hot to the touch; take care to not touch
the heat sink, or you may get burned.
Close Computer
1. Raise the side panel back into place (Figure 28).
2. Return the computer to your computing area if necessary, and
reconnect the power cord and peripheral cables to the computer.
Turn On Computer
Turn on your Power Mac; your accelerated machine should boot
normally.
screw
screw
side panel
9
screw
Figure 27
Figure 28
Advertisement
