Searching For Recorded Video; Exporting Recorded Video; Track List; Controlling Playback - Bosch FLEXIDOME panoramic 5100i User Manual

12 en | Operation via the browser
3.2.2

Searching for recorded video

On the left side of the browser, expand the Search group if necessary.
1.
2.
3.
4.
5.
6.
3.2.3

Exporting recorded video

On the left side of the browser, expand the Export group if necessary:
1.
2.
3.
4.
5.
Note:
The target server address is set on the Connectivity > Accounts page.
3.2.4

Track list

The Track list shows all the available recordings.
3.2.5

Controlling playback

The time bar below the video image allows quick orientation. The time interval associated with
the sequence is displayed in the bar in gray. Arrows indicate the position of the image
currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
–
–
–
Controls
Control playback by means of the buttons below the video image.
The buttons have the following functions:
–
–
–
3.3

Dashboard

The Dashboard page shows information on 4 topics:
–
–
–
–
You can also download a .JSON file with information about the device:
2022-01 | V01 | F.01U.385.628
To limit the search to a particular time range, enter the date and times for the start and
stop points.
Select an option from the drop-down box to define a search parameter.
Click Search.
The results are shown.
Click a result to play it back.
Click Back to define a new search.
Select a track in the track list or in the search results.
The start and stop date and time are filled for the selected track. If necessary, change the
times.
In the Time lapse drop-down box, select Original, to export the recorded video as its
original, Condensed to export the recorded video condensed to the given output time.
In the Location drop-down box, select a target.
Click Export to save the video track.
If required, click in the bar at the point in time at which the playback should begin.
Change the time interval displayed by clicking the plus or minus icons or use the mouse
scroll wheel. The display can span a range from six months to one minute.
Click the alarm jump buttons to go from one alarm event to the next or to the previous
one. Red bars indicate the points in time where alarms were triggered.
Start/Pause playback
Select the playback (forward or backward) speed using the speed regulator
Step forward or backward frame-by-frame when paused (small arrows)
Device status
Recording status
Connection Status
Services
User manual
FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
Bosch Security Systems B.V.