Disassembly Deck Mechanism - Panasonic SA-VK31EE Service Manual

Step 4 Unsolder the plunger terminals (2 points).
Step 5 Unsolder the motor terminals (2 points).
Step 6 Release the 2 claws (A), and then remove the Motor
P.C.B.
Step 7 Release the claw (B), and then remove the motor ass'y.
[Notice for motor ass'y installation]
1. Locate the name plate of motor to the traverse ass'y.
2. Align the hole of motor with the ribs.
All manuals and user guides at all-guides.com
29
9.7.

Disassembly Deck Mechanism

9.7.1. Replacement for the pinch roller
ass'y and head block
· Follow the (Step 1) - (Step 2) of Item 9.1 - Disassembly of
Top Cabinet and Rear Panel
· Follow the (Step 1) - (Step 6) of Item 9.1.1 - Disassembly
for CD Lid
· Follow the (Step 1) - (Step 2) of Item 9.2 - Disassembly for
the CD Mechanism Unit
· Follow the (Step 1) of Item 9.3 - Disassembly for the Main
P.C.B. & Transformer P.C.B.
· Follow the (Step 1) - (Step 2) of Item 9.4 - Disassembly for
the Panel P.C.B. & Tact Switch P.C.B.
· Follow the (Step 1) - (Step 5) of Item 9.5 - Disassembly for
the Deck Mechanism Unit & Deck P.C.B.
* The mechanism as shown below is for DECK1. For the
one of DECK 2, perform the same procedures.
Step 1 Release the 2 claws, and then remove the pinch roller
(R), (F).
Step 2 Release ther 2 claws, and then remove the head
connector.
SA-VK31EE